It’s entirely normal for there to be some condensation inside a refrigerator; however, a properly functioning fridge should be able to manage this condensation effectively so it doesn’t become a problem.
If you’re finding excess water inside your refrigerator that’s either dripping or pooling, it suggests that something somewhere is going wrong. Now, this could be because there’s an issue with the appliance itself OR how it’s being used.
This article will help you troubleshoot the issue of water dripping inside your fridge, offering straightforward advice and easy-to-follow tips. You’ll be glad to hear that because most of the time, water buildup inside a refrigerator is usually not a sign of a serious problem.
You can often resolve this issue yourself with some simple DIY fixes. Read on to find out how.
The most common cause of water dripping and pooling inside a fridge is a clogged drainage hole, also known as the defrost drain. The defrost drain is a small hole inside your fridge, usually located at the bottom near the back wall, where condensation is channeled, allowing it to drain away.
You can usually easily access it without having to disassemble anything, but you may need to take out some food items or drawers in the fridge. Sometimes, the defrost drain can get clogged with food particles, debris, or ice and needs unblocking.
Here’s how you can unclog the drainage hole:
Is your fridge door frequently opened or left open for long periods? If so, it can allow warm air to enter the fridge, leading to excess humidity and condensation, which can cause water to accumulate inside.
Likewise, if your fridge door is damaged, specifically the seal or gasket, it can have the same result, as it allows warm air and moisture inside.
Not only can these things cause the water dripping issue, but they can also force your refrigerator to overwork to maintain the correct temperature. This can lead to more severe issues for your appliance if left unfixed.
You can check and fix the door seal by:
Finally, once you have a proper seal, remind yourself and others not to open the fridge too often or leave it open for long periods if you believe this has been happening in the past.
The food items we store inside our fridge can sometimes be the cause of excess moisture. For instance, torn cartons, bottles with loose tops, or tubs with insecure lids can let the contents seep out.
Therefore, it’s worth unloading the fridge and inspecting each item for leakages.
Also, be aware that regularly putting hot foods inside can cause the fridge’s temperature to fluctuate, resulting in excess condensation and, eventually, water dripping and pooling on its shelves.
Always let food cool down adequately before storing it in the fridge to avoid this problem.
If your refrigerator isn’t sitting level, condensation may not be able to drain away properly, leading to pooling in whichever direction the appliance is tilting.
To correct this, place a spirit level on top of the fridge, then check its level both from side to side and front to back. If the spirit bubble shows it’s unlevel, adjust the legs underneath the fridge by turning them with a wrench, raising or lowering each corner until the unit is sitting flush.
If your fridge has a built-in water dispenser or ice maker, its internal water supply line can sometimes cause a leak inside. To check if that’s the case, follow these steps:
Leave a Comment